Adding battery storage to an existing commercial solar PV system can help businesses increase solar self-consumption, reduce peak electricity demand, and use stored energy during expensive tariff periods.
But how do you choose the right battery size?
The answer depends on more than your solar panel capacity. A properly sized commercial and industrial (C&I) battery energy storage system should match your facility's electricity consumption, operating hours, solar generation, and energy management goals.
1. Start with Your Facility's Energy Consumption
Before selecting a battery, review your electricity consumption data.
The most useful information includes:
- Daily electricity consumption (kWh)
- Maximum power demand (kW)
- Hourly or 15-minute load profile
- Daytime and nighttime operating hours
- Electricity tariff and peak demand charges
- Critical loads requiring backup power
For example, a factory may have a 150kWp rooftop solar system but still consume significant grid electricity during the evening.
In this situation, battery storage can help shift daytime solar energy to later operating hours.
2. Understand the Difference Between kW and kWh
Battery power and battery capacity are two different specifications.
Parameter | Meaning |
kW | How much power the system can deliver at one time |
kWh | How much energy the battery can store |
PCS Power | Maximum battery charging/discharging power |
Usable Capacity | Energy available after operating limits and losses |
For example, a 125kW / 261kWh C&I BESS has a rated battery capacity of 261kWh and a PCS power rating of 125kW.
At a constant 100kW discharge, the theoretical duration is:
261kWh ÷ 100kW = 2.61 hours
Actual operating time will be shorter depending on usable state-of-charge range, system efficiency, temperature, and operating conditions.
3. Calculate the Battery Capacity You Need
A simple starting formula is:
Required Battery Energy (kWh) = Average Load (kW) × Backup or Discharge Hours
For example, a factory needs to support an 80kW load for two hours:
80kW × 2h = 160kWh
However, the battery should not be sized at exactly 160kWh.
Assuming an illustrative 90% usable energy window and 92% discharge-path efficiency:
160kWh ÷ (0.90 × 0.92) ≈ 193kWh
This provides an initial sizing estimate, before considering battery aging, reserve capacity, future load growth, and site-specific conditions.
A 261kWh commercial battery may therefore be a suitable candidate for further evaluation.
For an existing solar installation, the battery should be sized according to available surplus solar energy, not simply the installed PV capacity.
Consider a factory with:
- Existing solar PV: 150kWp
- Daytime electricity consumption: 80–120kW
- Evening load: 70–80kW
- Desired battery discharge period: 2 hours
A 125kW / 261kWh system could be considered for evening load shifting, provided sufficient energy is available for charging.
However, if most solar generation is already consumed during the day, the battery may need to charge from the grid or another energy source.
The key is to analyze actual solar generation and load data before selecting battery capacity.
For many existing commercial solar installations, an AC-coupled battery energy storage system is a practical retrofit option.
Typical configuration:
Existing Solar PV → Existing PV Inverter → AC Distribution Bus
Battery Storage ↔ Bidirectional PCS ↔ AC Distribution Bus
AC Distribution Bus ↔ Factory Loads / Grid
This configuration can often retain the existing solar inverter while adding battery storage through a separate PCS.
Depending on the project, the system may support:
- Solar self-consumption
- Peak shaving
- Time-of-use energy shifting
- Export limitation
- Backup power, with suitable islanding and transfer equipment
Backup operation is not automatically available on every grid-connected BESS. It requires compatible PCS controls, protection, isolation, and system design.
6. What Battery Size Is Suitable for Your Business?
Different commercial facilities require different storage configurations.
Battery System | Potential Application |
100–200kWh | Small commercial facilities and limited peak shaving |
261kWh | Medium C&I solar retrofit and short-duration load shifting |
500kWh–1MWh | Factories, warehouses and larger commercial loads |
2–5MWh+ | Industrial parks, large factories and microgrids |
These are illustrative application ranges, not fixed sizing rules.
The final system should be selected based on load analysis, available charging energy, discharge power, operating strategy, and local electrical requirements.
7. Consider Safety, EMS and Future Expansion
Battery capacity is only one part of the system.
A complete C&I BESS may include:
LFP Battery + BMS + PCS + EMS + Thermal Management + Fire Protection
The Energy Management System (EMS) controls when the battery charges and discharges according to solar generation, facility demand, electricity tariffs, and operating priorities.
Before installation, confirm applicable safety certifications, grid compatibility, communication protocols, site conditions, and commissioning requirements.
8. Get a Battery Storage Recommendation for Your Solar Project
EnergyStar supports commercial solar retrofit projects with integrated equipment supply and technical coordination, including:
Solar PV + Inverter/PCS + C&I Battery Storage + EMS + Balance of System
Whether you are considering a 261kWh battery cabinet or a multi-MWh energy storage system, we can help review your preliminary configuration.
Send us the following project information:
- Project country and location
- Existing solar PV capacity (kWp)
- Electricity consumption or load profile
- Grid voltage and frequency
- Main application: peak shaving, solar self-consumption, or backup power
- Required backup or discharge duration
Contact EnergyStar to discuss a suitable C&I battery storage solution for your existing solar system.